- Windows 10 Free Update Install
- Windows 10 Needs Activation After Update
- Windows 10 Activation After Update
Activate Windows 10 After Update
Sometimes you may face the problem of activation after Windows 10 update. You have to use the product key to activate the Windows system. For every Windows copy, the product key is not the same. You cannot use the key of Windows 7 or 8 to upgrade it to Windows 10. Activation error after an update causes from the patches. However, when you see that your Windows 10 is not working after an update, you can follow the solutions available for it. You can then quickly activate windows 10 with a proper method.
Activate Windows 10 After update by using the troubleshooter
If you are sure that the problem occurs after the windows update, you can follow the troubleshooting process to solve the problem. But you should check that your Windows is starting successfully or not.
There are three feasible cases for volume activation of Windows 10 or the Windows Server 2012 R2 with the use of a KMS host: 1. Host KMS on a machine that runs Windows 10 2. Host KMS on a machine that runs Windows Server 2012 R2 3. Host KMS on a machine that runs a previous version of Windows. The KMS activator for windows 10. Last weekend there was a major update I guess (laptop was installing and restarting long time, there was the message 'All your files are safe where you saved them' - or something similar, in a big screen etc.) and so, after that, the 'Activate Windows Go to Settings to activate Windows' message appeared on the right bottom corner. Update problem means that all the Windows 10 updates don't install properly and you have to face the issue with a feature that comes with an update. Many users prefer to get a maximum feature in the Windows 10 operating system but due to lack of registration key in Windows 10.
Things you should check activate windows 10 after update
There are some matters you should take care while you face the activation problem of Windows 10 after an update. Let's see them.
1. Your Windows starts properly
In this case, when you open your Windows system, it will be opened normally. You can see the start button. But the certain program will not work successfully. You may face the problem of accessing to the internet connection, your Windows may be work slowly.
2. Your Windows may not start successfully
In this case, your Windows will not start with the normal screen. You may see a blue or dark screen nothing on the screen.
3. The update may be not fully installed
If your Windows installation is not fully completed, you will receive the message such as 'Preparing to configure Windows' or 'Configuring Windows updates' or such kinds of other messages.
4. Troubleshoot the problem
If you install the latest update of Windows 10, you can solve the problem with the built-in troubleshooter of the Windows system. It will help you to identify the problems. Besides, you can reset the Windows update.
For this, click on the Start menu. By clicking the left mouse, open the Settings option. Under this category, you will find Update and Security section. Now go to the troubleshoot option. From here, click the Windows Update and Run the Troubleshooter. Here, you should follow the given instruction and click on Apply this fix if your troubleshooter finds any solution.
5. Free the space of the disk
Sometimes, you can face that the update of your Windows works for sometimes and then stop installing the Windows update. In this case, you can free up some space of the hard drive. If you do not have enough space to install the update, the complete installation will be failed. You can clean up the system files to make more space. Then again try to do the update.
Windows 10 Free Update Install
6. Disable the antivirus software
If your computer has antivirus software, then disable it and again try to do the update to fix the problem. After completing the update, you can activate the antivirus.
7. Reset the update
If you see that the problems are remaining after the update, you have to reset the update and then try it again. For this, you need to use the Command Prompt. For this, follow the process below.
1. Your Windows starts properly
In this case, when you open your Windows system, it will be opened normally. You can see the start button. But the certain program will not work successfully. You may face the problem of accessing to the internet connection, your Windows may be work slowly.
2. Your Windows may not start successfully
In this case, your Windows will not start with the normal screen. You may see a blue or dark screen nothing on the screen.
3. The update may be not fully installed
If your Windows installation is not fully completed, you will receive the message such as 'Preparing to configure Windows' or 'Configuring Windows updates' or such kinds of other messages.
4. Troubleshoot the problem
If you install the latest update of Windows 10, you can solve the problem with the built-in troubleshooter of the Windows system. It will help you to identify the problems. Besides, you can reset the Windows update.
For this, click on the Start menu. By clicking the left mouse, open the Settings option. Under this category, you will find Update and Security section. Now go to the troubleshoot option. From here, click the Windows Update and Run the Troubleshooter. Here, you should follow the given instruction and click on Apply this fix if your troubleshooter finds any solution.
5. Free the space of the disk
Sometimes, you can face that the update of your Windows works for sometimes and then stop installing the Windows update. In this case, you can free up some space of the hard drive. If you do not have enough space to install the update, the complete installation will be failed. You can clean up the system files to make more space. Then again try to do the update.
Windows 10 Free Update Install
6. Disable the antivirus software
If your computer has antivirus software, then disable it and again try to do the update to fix the problem. After completing the update, you can activate the antivirus.
7. Reset the update
If you see that the problems are remaining after the update, you have to reset the update and then try it again. For this, you need to use the Command Prompt. For this, follow the process below.
Go to the search bar and write Command Prompt and then search for it. Then right-click on it and select the option 'Run as administrator'.
When it opens, you should write the command below:
Command
net stop wuauserv
net stop bits
net stop cryptsvc
Ren %systemroot%SoftwareDistributionSoftwareDistribution.bak
Ren %systemroot%system32catroot2 catroot2.bak
net start wuauserv
net start bits
net start cryptsvc
Windows 10 Needs Activation After Update
After submitting this command, restart your PC. Then install the update Windows again.
Activate Windows 10 manually after an update
Use the product key to activate manually
It is one of the best ways to activate Windows 10 after the update. For this, you have to use the genuine product key. Then follow the following steps.
Step 1: Click on the start button and find out the Settings app of the Windows system. Then tap to the Update and Recovery section. Now left click your mouse on the Activation option.
Step 2: Now you will find an option says Enter the Product Key. Then click on it and enter the product key on the box to activate Windows 10. This key may have 25-characters.
Step 3: Then click the Properties option and see another window. Here, you will see the option asking you to update your Product Key at the bottom of the window. Click on it.
Final words
There are many reasons of activation problem after Windows 10 update. You can follow the method described here to do the activation Windows 10 update. The methods are easy. At first, you should find out the cause of the activation problem. It will help you to solve the problem in the right way.
Windows 10 Activation After Update
Good Reads: Get free Xbox gold live code – No Survey
